Mounting the Eagle FishMark 320
Viewed: 262 times.
|
Beginning of Phase 1
Mounting the transducer shaft & wiring
Transducer shaft materials
Viewed: 322 times.
|
Completed transducer shaft
Viewed: 348 times.
|
Closeup of transducer mounting bracket
Viewed: 314 times.
|
transducer shaft will be mounted to the center of the front seat rail.
Viewed: 369 times.
|
Shaft is mounted to the frame with 2 hose clamps. Tightened only enough to allow the shaft to be swung up and down.
Viewed: 348 times.
|
The fuse for the fish finder and battery wired up. The wiring at the battery also includes the livewell pump wires.
Viewed: 378 times.
|
End of Phase1. Transducer shaft mounted and wiring complete.
Viewed: 386 times.
|
Beginning of Phase 2
Mounting the fish finder
Scrounged up Bracket Materials
Viewed: 272 times.
|
The bracket is a 6 1/2 inch piece of 3/4 tubing and a modified speaker bracket.
Viewed: 226 times.
|
Finished Bracket
Viewed: 204 times.
|
Bracket mounted to the frame
Viewed: 254 times.
|
Eagle FishMark 320
Mounting complete!
Viewed: 338 times.
|
Plan A (on left) BAD!
Plan B (on right) GOOD!
Viewed: 295 times.
|
It's a...
Viewed: 225 times.
|
perfect fit!
Viewed: 210 times.
|
Just another angle
Viewed: 235 times.
|
Bilge pump and Fish finder schematic diagram
Viewed: 627 times.
|
