This is the stock setup, not much room at all behind the seat. The plan is to take the motor mount off the back and mount a 1.25" inch PVC pipe frame onto the frame rails.
Viewed: 287 times.
|
This is the PVC frame, the elbow on the right side is the beginning of the side rod rack.
Viewed: 233 times.
|
After fitting all the pieces it slides on to the end of the frame rails.
Viewed: 243 times.
|
The rear view of the deck extension.
Viewed: 240 times.
|
Found this molded plastic peg board sheet on sale at WalMart for $4, the width between the rails is 24" so this is perfect, and the 16" length provides a good platform size for the 18 gallon container that I'm going to use as a livewell.
Viewed: 294 times.
|
The PVC rides around the edge of the pegboard
Viewed: 274 times.
|
Livewell container on the deck.
Viewed: 260 times.
|
Extended deck and livewell done!
Viewed: 264 times.
|
