"Follow me bag" livewell for float tubes.
This livewell meets the minimum BnT requirement for a follow me bag type livewell.
Viewed: 169 times.
|
View from the front
Viewed: 138 times.
|
Side view
Viewed: 108 times.
|
Bottom view
Viewed: 100 times.
|
Some foam pipe insulation is attached at the top for floatation
Viewed: 104 times.
|
Another angle of the floatation
Viewed: 118 times.
|
18 inches long
This dimension can be larger but we do not recommend going any smaller. It will de determined by what size mesh bag you acquire.
Viewed: 108 times.
|
by 10 inches wide.
This dimension can be larger but we do not recommend going any smaller. It will de determined by what size mesh bag you acquire.
Viewed: 100 times.
|
By 24 inches tall
Once again This dimension will de determined by what size mesh bag you acquire.
Viewed: 110 times.
|
It's collapsible! If you don't glue the vertical posts which connect the top to bottom the well can be broken down for easier transportation.
Viewed: 101 times.
|
Close up of the corner fittings.
The vertical posts are slip fit into the adapter joints and are not glued.
Horizontal pipes are glued into the elbows.
Viewed: 96 times.
|
Mesh dive bag with a draw string top.
A mesh laundry bag will work also.
Viewed: 106 times.
|
3/4 Inch side outlet elbow (8X)
Viewed: 84 times.
|
Adapter (8X)
3/4" S x 3/4" Mips
Viewed: 78 times.
|
Foam Pipe insulation (about 4 1/2 feet)
A swimming pool "fun noodle" can also be used for floatation and adds some vivibility as well.
Viewed: 80 times.
|
PVC cement and primer.
Viewed: 93 times.
|
